Technical Specifications (PDF)


Available Finish Colors

GP-12A™

Description[±]

The GP-12A is a very versatile loudspeaker perfect for self-contained systems requiring fast and inexpensive setups.

The reinforced, ribbed, two-piece mold design provides a non-flexing, low-resonant cabinet. The GP-12A may also be used as a floor monitor with mirror imaging capabilities. Also, each cabinet is equipped with a tension-adjustable stand mount design to eliminate leaning and for added strength when used on tripod stands or satellite poles. The GP-12A is well suited for stacking with top cups and bottom feet. Additionally, it is equipped with 4 fly points for permanent installation applications.

The GP-12A amplifier has external heat sink cooling fins. The main power supply uses a toroidal transformer to maintain high-quality tonality, stabilize bandwidth, and minimize the noise floor. An internal cooling fan is used to prevent air leakage that can cause detuning of the box, while also maintaining temperature control of the amplifier allowing it to run for hours of sustained use.

Voicing the microphone has never been easier. There is a mic and line level input allowing a mic to be plugged in direct, or for adding an external mixer or other audio device. When using the option of hooking up a mic line directly into the GP Series, the built-in sensitivity control and the 2-band equalizer allow flexibility and personal control of the critical frequencies for vocal optimization.

Check out the “less noise” knob! The GP-12A has a sensitivity knob to allow for the matching of the sensitivity levels on a variety of mixers. Additionally, the cabinet's XLR thru connections allow you to chain the boxes together while maintaining a full signal from each cabinet.

Application[±]

The GP-12A may be pole-mounted for use as a small, full-range, portable PA system or installed PA. A subwoofer may be added for additional low-end support. These speakers are equally adaptable as high-quality floor monitors.

These units are ideal for vocal and instrument reproduction, floor monitoring, or side-fills. The GP-12A is suitable for clubs, DJ's, live band, house of worship, corporate A/V, and educational facilities and anywhere a high-quality, self-contained portable PA is required.

Power up your Performance!

Specifications[±]

Power Handling :

(RMS):

400 Watts

(Program):

800 Watts

(Peak to Peak):

1600 Watts

Frequency Response:

47 Hz - 20 kHz

Sensitivity (1W @ 1M):

98 dB SPL

Power Configuration:

Bi-Amp

Nominal Impedance:

8 ohms

Dispersion:

Horizontal 90°

Vertical 60°

Components:

 

Low Frequency Driver

12" Cone

Components:

 

High Frequency Driver

1" Compression Driver

Connectors:

XLR In and Out

Product Dimensions:

(inches)

H - 23.50" W - 16.50" D - 12.75"

(millimeters)

H - 596.90 W - 419.10 D - 323.85

Product Weight:

37.5 Lbs / 16.9 Kgs

Shipping Dimensions:

(inches)

H -27.25" W -18.25" D -18.25"

(millimeters)

H -692.15 W -463.55 D -463.55

Shipping Weight:

46.2 Lbs / 20.8 Kgs

This Product Has Been Discontinued

Home | Literature Request | Contact Us | Legal

Grundorf Cases & Racks Home Page

Copyright © 1996-2024 Grundorf Corporation. All Rights Reserved